Best floor standing speakers under 5000 - Top rated tower speakers

Do I even need to point out the undeniable fact that a quality floor standing speaker can supercharge your entire sound system pretty much instantly?

Yeah, I didn’t think so, either.

They’re good-looking, attention-grabbing – and they sound spectacular. Most of the Hi-Fi speakers in this price range will happily fill a large room with sound or make for an excellent addition to your home theater.

You’d be insane to miss out on an opportunity to get one of the best floor standing speakers under $5000 – especially when I’m here to help you pick the right one!

In a hurry? After 34 Hours of Research, We Recommend:

Klipsch RP-8060 FA Dolby Atmos Floorstanding Speaker


Why it is better?

  • ​​Excellent 3D effects
  • Tonally accurate low, mid and high frequencies
  • Features the Hybrid Horn Technology
  • 98-dB sensitivity
92/100
our score

sourses
28

RESEARCHED SOURCES

441

REVIEWS CONSIDERED

34

hours researching

37

products compared

Last Updated: August 1, 2020

Best Floor Standing Speakers Under $5000 - Top 3 Comparison Table 

Product

Dimensions

Wattage

Frequency  Range

Sensitivity

Our Rating

Current Price

​​Klipsch RP-8060 FA Dolby Atmos Floorstanding Speaker

Rockford Fosgate P3D4-10 Punch

43 x 10.9 x 19.8 inches

150 watts

32 Hz – 25 kHz

98 dB

92/100

Klipsch RP-280F Reference Premiere Floorstanding Speaker

PIONEER TS-SW2502S4 10-Inch

43 x 10.5 x 16.3 inches

150 watts

32 Hz – 25 kHz

98 dB

87/100

SVS Ultra Tower Flagship 3-Way Loudspeaker

MTX Magnum MB210SP Dual 10

45.6 x 13.8 x 16.8 inches

20 – 300 watts

28 Hz – 32 kHz

88 dB

86/100

Buyer’s Guide: How to Pick the Best Floor Standing Speakers

Power Ratings

At the risk of acting like Captain Obvious here, floorstanding speakers – and any other type of speakers, for that matter – are going to need electricity to produce sound. That’s why the speaker’s wattage, among other things, is one of the vital tell-tale signs of its performance.

We’re talking about the power that your speakers will be able to push out – but that’s the simple part.

What’s not so simple is that there’s more than one power rating at play here. You see, wattage is split up into two categories – continuous, or RMS, and peak power.

Peak power ratings are the more attention-grabbing ones, and you’ll often manufacturers advertising these insanely high numbers because they look impressive. However, these only tell you about the maximum capacity, something that the speakers can only handle in short bursts.

The real power rating to focus on is continuous (RMS) – that’s a far more realistic take on how powerful tower speakers are. In other words, it shows you the amount of power that they really can push out continuously, on any given day, and on average volume levels.

Sensitivity

It’s really easy to get carried away when you see best speakers boasting impressive-looking power handling capabilities, but be sure not to overlook the sensitivity, which, by the way, directly relates to loudness.

Sensitivity is a way to measure the efficiency of speakers in terms of converting sheer power into audio and is expressed in decibels (dB).

So, in theory, if you were to have several speakers that shared the same construction and specifications, with the only difference being their sensitivity ratings, they would have noticeably different loudness levels, even when using the same amount of power.

That said, there’s no universal, independent testing or standards for speaker manufacturers. However, sensitivity is still a generally accepted means of determining the speaker’s potential loudness.

Floorstanding speakers do tend to lead the way when it comes to sensitivity levels, with some models shooting for exceptionally high, 98-dB sensitivity. In any way, you really shouldn’t settle for anything less than 88 decibels.

Frequency Response Range

The frequency range is, in essence, a measure of how high and how low the sound can go, which sounds simple enough on the surface.

In theory, a more extensive frequency range will ensure more detail and clarity of the audio that the speakers produce, even if the human ear is, in practice, only capable of hearing sound within the 20 Hz to 20 kHz range.

It’s not that simple, though.

You’ll see that there are products that dip way down into the low end and shoot way beyond the upper limit of our hearing. That doesn’t mean that you’ll suddenly be able to pick up sounds that go outside the range of human hearing just because your speakers can produce them.

Instead, it will result in a noticeable increase in detailing and precision throughout the frequency range, and bass that you’ll undoubtedly feel thumping away – even if you won’t really be able to hear it.

Drivers

Floorstanding speakers typically feature several drivers – individual “engines” that produce sound through vibration – as a part of their configuration to ensure a more vibrant and detailed sound.

We’re talking about different types of drivers, too, each of which is responsible for a particular portion of the speaker’s frequency response range.

That’s also why you’ll see a noticeable difference in driver size, too:

High-end frequencies have short sound waves, and the actual drivers that produce them can be smaller. The low-end frequencies, however, have long sound waves and call for significantly larger drivers.

And while this can vary from speaker to speaker, there are the three types of drivers you can expect to find in most floorstanding speakers:

Tweeter – These relatively small drivers get their name from the sounds that birds make, and are reserved for high-pitched sounds. They’re typically located on top of the speaker’s front panel and cover the high-end frequency range.

Mid-Range Driver – Roughly speaking, the mid-range goes from 500 to 2000 Hz. That also happens to be the range where the human voice and instruments fall in, which is explanation enough as to why you need a good midrange driver.

Woofer – Tackling the low-end and delivering high-quality bass response is what woofer drivers do best. The superior bass lines of the tower speaker’s woofers are one of the reasons why they’re often picked over bookshelf speakers.

Overall Design: Dimensions and Looks

The specifications I talked about previously are only a part of the equation when it comes to choosing the best floorstanding speakers. When you have a set of tall, attention-grabbing tower speakers placed smack in the middle of the room, you quickly realize how vital their look is, too.

So, the aesthetic aspect is something that shouldn’t be overlooked. Otherwise, you may end up with speakers that look a bit out of place – or even flat out ugly.

Next, you should pay attention to the construction of the cabinet, which should be well-made and anti-resonant. Ideally, it should feel durable and sturdy without allowing any variations in response or sound distortions.

Oh, and last but not least, do make sure that you’re getting the right size for the room, because tower speakers are by no means small and compact units.

The larger the speakers, the louder the sound – but you still need to check the actual dimensions to see whether they’ll physically fit in their designated space!

Best Floorstanding Speakers Under $5000 Reviewed 

Klipsch RP-8060 FA Dolby Atmos Floorstanding Speaker
Our Rating: 92/100

If you have read some of my previous reviews, you can probably tell that Klipsch models have often made it to my top picks. It can be attributed to the top-notch HiFi speakers that this company has produced over recent years.

And I can tell you that their 2018 model, Klipsch RP8060 FA Dolby Atmos floor-standing speaker, is no different than their standard signature. If you’re new to this line, however, let me introduce you:

“RP” is short for “Reference Premiere” line that holds the first place when it comes to home theater and other events that require an immensely powerful set of stand speakers. That’s the reason why the 8060FA is not the only product from the RP series I’ll be reviewing today.

The Design

Firstly, this speaker is easy on the eyes, with sleek metallic trim rings, aluminum-plated spikes, and a satin finish on the baffles. The spikers, or feet, are designed to minimize the contact of the speaker with the floor, and it is a nice touch.

Did I mention a beautiful, laser-engraved logo at the front?

It adds to the overall look. There is a reliable and sturdy magnetic grille that you can easily mount and remove, but I must admit I prefer this one without it. It’s just too attractive to cover it.

Everybody will envy you if you own one of these home theater speakers - even more so when you turn them on.

So, let’s see what they offer performance-wise.

The Performance

Klipsch RP-8060 comes with virtually everything one could ever want from a valuable floor standing speaker.

The peak power that the speaker holds is 600 watts, whereas the maximum continuous power is up to 150 watts. Pretty thunderous, huh?

The outstanding sound and bass quality come from two 8-inch spun-copper woofers, enhanced with an upward 6.5-inch woofer. 

This system of drivers also features a 1-inch horn-loaded tweeter, which is another remarkable trademark of Klipsch speakers. It accounts for the high-frequency precision and details.

In addition to securing an excellent life-like quality at all frequencies, woofers and the horn-tweeter provide a spectacular 3D dimension to the sound due to their effective positioning. This means that besides movies, music will sound fantastic.

If tiny details matter to you, you’ll be happy to learn that you can switch between two channels of amplification, as this HiFi speaker has both bi-amp and bi-wire connections on the backside.

Pros

  • Excellent 3D effects
  • Tonally accurate low, mid and high frequencies
  • Features the Hybrid Horn Technology
  • 98-dB sensitivity

Cons

  • None! 
Klipsch RP-280F Reference Premiere Floorstanding Speaker
Our Rating: 86/100

Did you know that Klipsch has over 70 years of experience under its belt?

Considering the effort and time that went into perfecting the design of their home theater floorstanding speakers, you shouldn’t be surprised to see another Klipsch product on my list.

The RP-280F of the Reference Premiere series, in particular, is an excellent choice for the budget-conscious bunch!

The Design

First off, know that we’re talking about an updated version of the old but well-known model from Reference II line here. At the same time, though, you should treat the RP-280F as a unique pair of floorstanding speakers, because they do come with a few essential modifications.

There’s a recognizable Klipsch vibe to the MDF cabinets, with the spun copper finish and the Tactrix horn; that, I think, is something that will never change.

I like how they were given a slight tilt at the base, too, which should help with the overall soundscape focus.

Hidden behind the magnetically-attached grille are the speaker’s drivers – all three of them. The RP-280F boasts dual 8-inch drivers and a one-inch tweeter fitted inside the Tractrix horn. Another distinction is the rear-firing Reference Premiere port, which now has the signature horn-like shape, too.

Klipsch and its horns, am I right? 

The Performance

You’re looking at a pair of large floorstanding speakers; the amount of sound that they can push out shouldn’t come as a surprise.

Or, at least that’s what I told myself when I started the music listening test. And guess what? I still had to pick up my jaw from the floor.

The 32 Hz to 25 kHz frequency range, the 150-watt RMS power, and the 98-dB sensitivity all come together – and team up with the drivers I just mentioned – to create a massive powerhouse of a speaker.

And when you have a pair, the full experience is unparalleled.

The bass is deep, punchy, and powerful overall, and the rest of the range is produced with exceptional richness, clarity, and detail.

I honestly don’t think that you can get a better sounding pair of speakers than the RP-280F in this price range!

Pros

  • ​Amazing value for the money
  • Deep lows and thunderous power
  • Surprisingly good mids
  • Great sensitivity

Cons

  • ​​Considering the price, I simply can't complain!
SVS Ultra Tower Flagship 3-Way Loudspeaker
Our Rating: 86/100

If you’re going to name your speakers “Ultra,” they better have the looks and performance to back it up. Then again, this is SVS we’re talking about; if there’s a speaker manufacturer that can create such a mean-looking set of speakers following the "bigger-is-better" rule, it’s them. Seems like people there simply don't like little things.

Granted, the brand may be better known for the subwoofers – but the SVS Ultra Series loudspeakers are an excellent high-end-sounding solution, nonetheless.

The Design 

They’re in a league of their own design-wise. There’s nothing boxy or typical about these speakers:

Rather than going straight down, they’re a geometric statement of sorts, with the backside flaring out, creating a dramatic effect.

Because of this, the dimensions of the speakers are all over the place. However, there’s no denying that standing 45.6 inches tall, they dominate the room.

One of the benefits of this not-so-compact cabinet design is that it has enough room for large drivers – and quite a few of them, too.

The front panel is home to a one-inch, aluminum-dome tweeter, located between two composite glass-fiber 6.5-inch mid-range drivers. The SVS ForceFactor 8-inch woofers, however, are horizontally opposed at the base and combined with a rear-firing bass port. 

The Performance

The "bigger-is-better" theme includes more than the design of these speakers, and bleeds into their performance, as well. Let's review the performance:

The recommended power clocks in at 300 watts, coupled with a rather average, 88-dB sensitivity, which doesn’t sound overly impressive; it's good overall, especially when you pair it with enough power. The frequency response range goes from 28 Hz to 32 kHz, and is one of the first indicators of what you’re in for:

These speakers deliver full, deep, and impactful bass that anchors the sound with a thundering low-end. More importantly, despite all its heft, it remains agile and responsive. You may get away with skipping a dedicated subwoofer altogether!

It’s not without flaws, as I did notice a lack of snappiness and detail at the very top, probably because the poor, little tweeter couldn’t keep up with the monstrous thundering beneath it.

The sound is still exceptional, with good stereo imaging, and a fluid and captivating mid-range that not once sounded unfocused or muffled.

Pros

  • Geometrical, eye-catching design makes them stand out
  •  Solid frequency range and plenty of loudness
  • Two 8-inch horizontally opposed woofers per speaker
  •  Tight, deep, and impactful bass

Cons

  • ​The highs can come off as overwhelmed by the powerful bass
Martin Logan Motion 60XT Gloss Black Floor standing Speaker - Each
Our Rating: 81/100

When you read “Martin Logan,” you thought of those electrostatic panels, didn’t you?

But as much as I respect the innovation behind that line, I’m here to show you some of the best floor standing speakers under $5000. It’s the non-electrostatic Motion series, and the 60XT speaker, in particular, that fits the bill here.

The Design 

The 60XT may be the largest in the Motion series – it is, after all, 48 inches tall – but it’s far from bulky. Despite the rather bold dimensions, Martin Logan’s designer team managed to retain a sense of much-appreciated elegance:

The speakers are tall and slender, and the gloss finish prevents them from looking all too plain, while also ensuring that they fit into any environment, without drawing too much attention- a lot to like.

Another interesting thing about this model is the feet – or spikes – that help drive the feet into thick carpeting to make it more stable, while also lifting the speaker off the floor.

There are three woofers total – dual 8-inch woofers and a dedicated midrange driver – and the innovative Folded Motion XT tweeter with an increased surface area sitting at the front panel.

That “XT” part must stand for “Extreme,” huh?

The Performance

The specs seemed really promising, with 20 to 400 watts of power per channel and a sensitivity of 94 decibels. The frequency range is a little less broad than I would prefer but still goes from 35 Hz to 25 kHz.

The sound quality of these speakers is every bit as shiny as that glossy finish of theirs; I was taken aback by how well defined everything was!

Also, I didn’t find this level of clarity and neutrality even in some high-end speakers, especially when it came to tough-to-reproduce instruments. The 60XT manages to keep the music natural and free of coloration, which is a huge plus.

Killer bass and a vast soundstage are tons of fun, but I want to add that a balanced midrange and detailed, natural highs play a significant role when you’re listening to music. And this Motion model offers all that – and then some.

Pros

  • Features the Folded Motion, accordion-like tweeter technology
  • Strong bass response thanks to dual woofers and a mid-range driver
  • Excellent imaging and soundstage
  • Maintains neutrality and keeps the sound natural and coloration-free
     

Cons

  • May require a break-in period
Definitive Technology BP9020 & CS904
Our Rating: 80/100

My next pick, BP9020 & CS904, a pair of speakers by Definitive Technology, offers as many as 19 speakers in their construction.

How is that even possible at this price category, you may ask?

Time after time, my reviews prove that some models that cost almost twice as much don’t deliver such a satisfactory performance as an inexpensive model. That’s an axiom that can be applied to the case of these Definitive Technology speakers, too. Let's review them in detail!

The Design 

Measuring at 8 inches at its tallest point, this set of speakers won’t take up much space, and it is easy to move from room to room.

What bumped them above some other floorstanding speakers in the physical department is an elegant, all-black look that will nicely fit any interior. What I also like is that the speakers come with little screw-on legs for wooden floors, which maximizes their durability.

Speaking of accessories, you’ll also get a removable base, and there are four built-in carpet spikes, which reinforce the stability well. Also, the cabinet is resonance-free, meaning that the designers implemented physical features having the sound quality in mind.

The power cord is about 6 inches long, so you want to position these speakers right next to a power outlet, or buy an extension to complete your ideal setup. This trade-off is worthwhile the other features that B9020 & CS904 set offers.

The Performance

Sixteen speakers positioned across two tower speakers (8 in each), and three in the center channel are responsible for the exquisite sound delivery of this set.

More precisely, there are 3.5-inch drivers and 1-inch tweeters in front and the rear part of the tower speakers, as well as 4.5-inch drivers and a tweeter in the center channel.

When this translates to units of performance, my grades are excellent for all elements: frequencies, clarity, and accuracy, except for the bass quality.

While these speakers feature Intelligent Bass Control, I must admit that I’ve seen some more intelligent bass control systems. The bass can get muddy sometimes, though this disappears once you figure out the best settings for each volume. So, if you don’t mind adjusting the bass manually, this is not a great con.

If clear tones and high volumes with a decent bass (I cannot pronounce it great) are your jam, then this set of speakers is what you’re looking for!

Pros

  • ​​Budget-friendly price
  • Free accessories included
  • Bipolar Technology for well-balanced sound effects
  • Built-in docking port
  • 150W RMS

Cons

  • ​The cord is a bit short
  • No bi-amplification feature
Klipsch 1064559 RF-7 III Floorstanding Speaker Black Ash
Our Rating: 77/100

A household name (over 70 years in the business) of Klipsch surely must find a place in this roundup. As such, it has inclined me to expect the level of quality and craftsmanship their products delivered to the public for such a long time. 

The RF-7 III comes as a flagship product, advertised as a new generation with a lot of improvements - let’s find out what it is like!

The Design 

Looking at this bad boy, the first impression one could get is robustness. It looks sturdy more than anything else. Compared to RF-7 II, it is substantially larger.

The shape is standard that you’d expect from a floor-standing speaker, placed on a stable yet quite sleek plate. Nothing special, yet interesting enough to draw the attention. 49 inches of height put it at the industry standard, while the 13.9-inch width and 17.9-inch depth complete the overall look. 

Thick quality wood has been used to make this enclosure, and the finish is very soft to the touch. The big front grille is removable, so you can pick between alternate front appearance styles, to suit your preference. 

Under it, you find the striking dual spun-copper cerametallic 10-inch woofers, paired with an 8.5-inch, square-shaped tractrix horn, loaded with a 1.75-inch titanium driver. 

On the backside, the dominant dual tractrix ports grab all the attention. This means both woofers have their own HQ enclosures. Well, there's nothing new in the design sector, which may set some people off, but they would make a mistake in that case.

Here's why:

The Performance

Klipsch is a household name in the States for a reason - they deliver thudding bass and amazing mids since they appeared on the market, around 70 years ago. As a new addition to the lineup, RF-7 III delivers a strong punch in the performance section as well. 

Since we all know what’s important in a quality speaker, let’s address the specs accordingly:

The sheer power of 1000 wats sounds like a fantastic feature, right? And at peak moments, it is there for this bad boy. On the RMS side of things, you get 250 solid watts of power, which is amazing. 

You really can’t complain about the noise level for sure, especially when you consider the 100dB sensitivity - yup, you read that right. When we talk about the frequency response, the RF-7 III brings 32Hz to 25kHz range, which is nothing to write home about, unfortunately.

Still, to produce great audio you won’t need much power - about 30 to 50 watts will get them thundering. Speaking on thundering though, there’s no dedicated subwoofer present; I wanted to mention that in the review because it might be important for some people who want an all-in-one audio setup that will serve them for a long time.

Also, RF-7 III may need a little break-in time - don't forget about this if you're planning to buy it. After about 100 hours, they will set in and serve you amazing for both movies and music for years to come. 

Pros

  • Great enclosure
  • Superb sensitivity
  • Dual tractrix ports - separate enclosures for both drivers
  • Impressive sound on both ends

Cons

  • Subpar frequency range
  • No dedicated subwoofer (although quite compensated)
Polk Audio LSiM 707 Ultimate Floorstanding Loudspeaker
Our Rating: 77/100

Polk Audio is another household name in the world of audio equipment. Their vast product line and brand values often focus on delivering the best bang for the buck, while striving for the highest quality possible. Not including a product from this brand in a roundup like this would be a shame, since Polk Audio has a lot to offer.

Today's last pick is the LSi M 707 model, Polk's very interesting floorstanding speaker. The old custom says - if you want quality, you have to pay. Will it be true for this one?

Let's find out!

The Design 

Standing on its foundation plate, this speaker reaches 50 inches of height. After the size, the first thing that leaves the impression is the curved housing & glossy finish, paired with big rubberized woofers at the bottom, and an overall mix of modern & old-fashioned look.

I've left the biggest for last - it's definitely true. Furthermore, this speaker weighs stunning 99.5 pounds - which has to mean some quality materials were used in its construction & assembly, starting with mahogany wood. The enclosure is covered with piano black on the front, which is a fingerprint magnet. On the side, the midnight mahogany gets a subtle red hue, which is noticeable when you get really close.

You get the little legs and a funnel-like adjustment for airflow at the bottom, alongside the removable magnetic grille, of course - which is a good idea if you ask me because I don't really dig the aesthetics of this setup.

The Performance

So, let's talk about how the M 707 performs - is it a bust or an affordable gem?

Well, considering its price & specs that you get for it, it leans toward the latter. The speaker has a 38Hz to 30kHz frequency range, which is bad at low but more than decent in highs. I must say that the manufacturer's statement on the specs sheet is a bit enthusiastic - 40Hz is where M 707 lows realistically fare.

The power handling goes from 20 to 300 watts, and there's no official RMS power on the site. Furthermore, the M 707 speaker is declared at 88dB sensitivity, which I wouldn't agree with - it's quite lower, I'd say below 80.

Still, even though this is not a good thing, the speakers sound quite great when they're not pushed high. Seems to me that they're built for a decent, steady person who doesn't push their speakers above 50% of their power. If you're such a person, you'll be delighted with the quality - from bass to mids & highs all around, in both music and movies.

The second reason for this assumption - R 707 requires significant power to sound really good (200-300 wats minimum) when you want to push it. I didn't do this, and I would presume these would start to drop in quality on higher power handling. Will have to test that to confirm in the future.

And finally, I've realized that the sound improves a bit after a while - which means you won't be able to actually reach the sound quality you're aiming for until you let the speaker break-in for at least 60 hours. 

Pros

  • Very cheap for what it brings
  • Crisp and precise when on low
  • Great at mids and highs

Cons

  • Require a lot of power to function properly on high
  • I'm not really blown away by the looks
  • Require break-in period 

Floorstanding Speakers – Frequently Asked Questions

Q: What is the best floor standing speakers?

A: After learning about the details, features & specs that make the best floor standing speaker, the choice is quite obvious - Klipsch RP-8060 FA Dolby Atmos Floorstanding Speaker is the clear winner. The quality of audio it brings simply outshines all the others on today's list, and when considered their price and features, it's a no-brainer, for both music and movies.

Still, the final answer always depends on you - your preferences, requirements, current gear & acoustics of the room you want to put the speaker in.

Q: Are Klipsch speakers worth the money?

A: Yes, yes, and yes! Excuse the overly enthusiastic answer to this question, but there’s no doubt in my mind that the Klipsch speakers are worth every penny. And no, I'm not biased here:

Generally speaking, Klipsch products are considered the top of the premium, high-range budget speakers. They can get a bit more expensive than the average speakers – which might seem too much for the entry-level hobbyists – but they outperform many other speakers in the same price range.

Most importantly, the clarity of sound and the quality of construction that they offer are virtually unmatched.

Q: What makes a good audio speaker?

A: I went through the most important specifications and features that make for good floorstanding speakers, and the same holds for audio speakers in general. The main things to pay attention to in terms of great sound are power ratings, driver size, frequency range, and sensitivity. Those are non-negotiable.

Having an audio speaker with an attractive design, a durable enclosure, and additional connectivity options wouldn’t hurt, either.

Q: Are floorstanding speakers better than bookshelf speakers?

A: There’s no universal answer to this question because it comes down to several variables, including the specs of both types of speakers and finding something that may fit your needs (music & movie), environment, and future use.

Tower speakers are tall and slim, while their bookshelf counterparts have a more “short and chubby” appearance. Furthermore, floor standing speakers can typically produce a much more powerful and accurate sound and create a broader sound stage than the bookshelf variety, which often struggle with delivering the same levels of raw power.

I wouldn’t necessarily say that one’s better than the other – it’s all about where and how you need your speakers to look and perform. But, as far as home theater and Hi-Fi audio go, the floorstanding options have a slight edge over the compact, bookshelf ones.

After it's all said and done, we recommend:

Klipsch RP-8060 FA Dolby Atmos Floorstanding Speaker


Why it is better?

  • ​​Excellent 3D effects
  • Tonally accurate low, mid and high frequencies
  • Features the Hybrid Horn Technology
  • 98-dB sensitivity
92/100
our score

Conclusion

At the end of the day, the best floorstanding speaker under 5000 for sure is Klipsch RP-8060 FA Dolby Atmos Floorstanding Speaker. The amount of value it brings through features & sheer quality is unprecedented - any audiophile will fall in love with them in an instant!

Even though there are many floorstanding speakers out there with great sound quality and the decision which one to buy is quite difficult, I think that my guide will remove all the doubts from your mind.

Make sure to check some of my other guides - like best soundbars under 300 or best floor standing speakers


Barry Allen

About the author:

Barry Allen

I grew up to be a self-proclaimed stuck-up audiophile, and I – partially – blame Pinnacle Speakers for it.


The whole point of me starting this website was to keep the tradition going. Although the means have changed, the mission remains the same: Bringing „sterling sound“ as they once put it into home theaters and sound systems worldwide! 


Leave a Comment